DIY Recycled Magazine Basket for Storage
Old magazines can become a colorful storage solution instead of heading to the recycling bin. With a few simple folds, a little glue, and an afternoon of crafting, glossy pages can be transformed into a lightweight basket for toys, craft supplies, mail, or bathroom essentials.
This project uses basic paper-weaving techniques that are approachable for beginners. The finished basket has a cheerful patchwork appearance, and each one will look different depending on the magazine colors, patterns, and headlines you choose.
A cardboard base gives the basket extra stability, while a final coat of varnish or decoupage medium helps protect the paper. You can make the basket rectangular, square, or even shallow enough to use as a decorative tray.
Gather The Materials
Choose several old magazines with pages in good condition. Fashion, travel, food, and home magazines often provide especially attractive colors and photographs. Avoid pages that are badly torn or extremely thin, as they may split during folding.
You will also need scissors, a ruler, a pencil, a glue stick or white craft glue, and a piece of sturdy cardboard. Clothespins or binder clips are useful for holding folded strips in place while the adhesive dries. Optional supplies include acrylic varnish, decoupage medium, a paintbrush, and a hole punch with ribbon for handles.
For a medium basket, prepare around 35 to 50 magazine pages. The exact amount depends on the size of the base and how tightly you weave the strips. Keep extra pages nearby so you can replace pieces that crease or tear.
Prepare The Paper Strips
Remove each page carefully from the magazine. Place it face down and fold one long edge toward the center. Fold the opposite long edge inward so both edges meet. Fold the strip in half again and press firmly along every crease. This creates a narrow, sturdy paper band rather than a single fragile layer.
For a basket with a neat, uniform finish, use a ruler to guide the folds. Strips approximately 1 to 1½ inches wide are easy to handle. If you want a more rustic look, vary the strip widths slightly and allow contrasting colors to appear throughout the weave.
Make two groups of strips. One group will form the base and vertical supports, while the second group will be woven horizontally around the sides. Apply a small amount of glue beneath the final flap on each strip, then press it closed until secure.
Build A Firm Woven Base
Cut a cardboard rectangle for the bottom of the basket. A piece measuring approximately 8 by 10 inches makes a practical storage container, but you can scale the dimensions to suit your materials. Cover the cardboard with magazine paper or paint it a coordinating color if you want the base to blend into the design.
Lay the first strips across the short width of the cardboard, spacing them evenly. Add another set of strips across the length, weaving over and under the first set. Keep the pattern tight and check that the corners remain square. A thin layer of glue on the cardboard can stop the strips from sliding as you work.
Trim or fold the ends around the underside of the cardboard. Glue them down securely. For extra strength, cover the underside with another piece of cardboard or a sheet of decorative paper. Allow the base to dry before lifting the strips upward.
Raise And Weave The Sides
Gently bend every strip extending from the base upward to create the basket’s vertical ribs. Fold them at a sharp angle along the edge of the cardboard. If the paper resists, run a fingernail along the fold rather than forcing it, which can cause the strip to split.
Take a fresh folded strip and weave it around the sides, alternating over and under the upright strips. When you reach the end, tuck the strip behind a vertical rib and glue it in place. Start the next strip at a different corner so joins are distributed around the basket instead of forming one bulky seam.
Press each completed row downward with your fingers. Tight rows make a stronger basket and reduce gaps. Use clothespins to hold the sides temporarily, especially near the corners. Continue until the basket reaches your preferred height.
| Basket Style | Suggested Base | Approximate Height | Best Use |
|---|---|---|---|
| Small square | 6 x 6 inches | 4–5 inches | Keys, cosmetics, or clips |
| Medium rectangle | 8 x 10 inches | 6–8 inches | Mail, toys, or craft tools |
| Wide shallow tray | 8 x 12 inches | 3–4 inches | Tabletop organization |
| Tall narrow basket | 6 x 9 inches | 9–11 inches | Wrapping paper or fabric scraps |
Secure The Rim And Add Handles
When the sides are tall enough, trim each upright strip so it extends about 1½ inches above the final woven row. Fold each end inward and tuck it beneath the next horizontal strip. Add a small dot of glue under every folded section, then clip the rim until it dries.
For a clean border, prepare several extra folded strips and glue them around the top edge. A double-layer rim gives the basket a finished appearance and helps prevent the paper from unravelling during use. Let the adhesive dry completely before removing the clips.
To make handles, punch two matching holes on opposite sides of the basket. Thread ribbon, braided magazine strips, or lengths of sturdy cord through the holes and tie secure knots inside. Handles are best for lightweight contents unless the basket has been reinforced with extra cardboard and several protective coats.
Protect The Finished Basket
Paper baskets are suitable for dry indoor storage, but they should be protected from water and heavy objects. Brush on a thin coat of decoupage medium or water-based acrylic varnish, covering the outside, rim, and inside walls. Let the first coat dry fully before adding another.
Work with light layers so the magazine pages do not become overly wet or wrinkled. Test the finish on a spare folded strip first, since some inks may smear when exposed to liquid. A matte finish preserves a soft handmade look, while gloss makes the colors brighter and gives the basket a more polished appearance.
Leave the basket in a well-ventilated place until it is completely dry. Once hardened, it can hold lightweight items such as folded scarves, plush toys, stationery, yarn, seed packets, or reusable shopping bags.
Make The Design Your Own
Sort pages by color before folding to create deliberate stripes, blocks, or a rainbow effect. You can also turn selected pages outward so recognizable photographs become small visual accents. Mixing bold prints with plain text pages keeps the pattern balanced.
For a seasonal version, use pages in autumn colors for a harvest storage basket, bright pastels for a spring craft project, or red and green pages for a festive decoration. A fabric lining glued inside the basket adds softness and can hide uneven folds.
Keep these practical ideas in mind while customizing the project:
- Choose heavier pages for the bottom and rim, where the basket receives the most stress.
- Use alternating strip colors to make the over-and-under pattern easier to follow.
- Reinforce the base with two layers of cardboard when storing toys or books.
- Add felt pads underneath to protect shelves and tables.
- Label the basket with a paper tag, painted word, or small cardboard shape.
A recycled magazine basket is useful, inexpensive, and easy to adapt to the needs of your home. Gather a stack of colorful pages, fold a few test strips, and begin with a small container before experimenting with larger sizes and new weaving patterns. Share your finished creation with the TO MADE IT! community and celebrate the creative possibilities hidden in everyday materials.