Sew a Cozy Fleece Blanket with Tied Fringe Edges
A soft fleece blanket is a practical beginner sewing project, especially when you want something warm, colorful, and useful without complicated patchwork. With two coordinating fleece fabrics, a sewing machine, and a few careful cuts, you can make a washable throw for the sofa, a child’s room, or a thoughtful handmade gift.
The tied fringe gives the blanket a playful finish while hiding the raw outer edges. You can choose contrasting colors for a bold look, matching prints for a calmer style, or a solid fleece paired with a patterned layer. The project works well for adults and older children who are learning basic fabric handling.
The measurements below create a finished throw of approximately 48 by 58 inches. You can easily adjust the size for a baby blanket, lap blanket, or larger bed covering by keeping both fleece pieces the same dimensions.
Choose fabric and gather supplies
Select anti-pill fleece with a soft surface and enough body to hold its shape. Lightweight fleece makes a flexible blanket, while medium-weight fleece creates a warmer, heavier throw. Avoid fabrics with very different thicknesses because they may shift while being stitched and tied.
For a standard throw, purchase two pieces of fleece measuring about 54 by 64 inches. The extra fabric allows you to square the edges and create a fringe border. You will also need matching or contrasting thread, fabric scissors or a rotary cutter, a cutting mat, a ruler, pins or clips, an iron, and a sewing machine.
If you want a decorative finish, add washable fabric chalk for marking, a walking foot to help feed the layers evenly, and a wide zigzag or decorative stitch. Fleece does not usually fray, so the edge treatment can remain simple and relaxed.
Prepare the blanket layers
Wash and dry the fleece according to the care label before cutting. This removes loose fibers and lets you work with fabric that has already settled. Lay each piece flat on a clean floor or large table, keeping the selvage edges aligned as closely as possible.
Trim away uneven edges and cut both layers to the same size. Place the fabrics with their right sides facing outward, so the soft or attractive sides are visible on both surfaces. Smooth the layers from the center toward the edges, then secure them with clips or pins several inches apart.
Decide how deep you want the fringe. A five-inch border is easy to tie and leaves enough room for a neat stitched line. Mark a square or rectangular inner border five inches from every edge. This guideline separates the sewn blanket body from the tied fringe.
Compare useful blanket options
| Blanket choice | Fabric amount | Fringe depth | Best use |
|---|---|---|---|
| Baby or stroller blanket | Two pieces, 36 x 44 inches | 3–4 inches | Nursery, stroller, or travel |
| Lap blanket | Two pieces, 44 x 54 inches | 4–5 inches | Reading chair or wheelchair |
| Standard throw | Two pieces, 54 x 64 inches | 5 inches | Sofa, guest room, or gift |
| Oversized cozy throw | Two pieces, 64 x 74 inches | 5–6 inches | Sharing on a bed or couch |
These dimensions are flexible because fleece blankets do not require exact tailoring. For a smaller project, shorten both the center and the fringe evenly. A narrow border creates a tidy, modern appearance, while deeper strips produce a more noticeable knotted edge.
Before cutting, consider the direction of a printed design. Some fleece patterns have an obvious top and bottom, and a directional print may look sideways after the blanket is finished. Solid fleece, dots, stars, and abstract designs are particularly forgiving for a first project.
Stitch the blanket center
Thread the sewing machine with polyester thread and select a medium-length straight stitch. Starting on one marked guideline, sew around the inner rectangle, backstitching at the beginning and end. Keep the line smooth and consistent, but do not worry about making it perfectly decorative.
The stitched rectangle anchors the two fleece layers and prevents the blanket from shifting during use. If the fabric stretches as you sew, support the blanket on the table or floor rather than allowing its weight to pull against the needle. A walking foot can make this step easier, though it is not essential.
For extra durability, sew a second line just inside the first, leaving about a quarter-inch gap between the rows. You can also use a zigzag stitch around the inner border for a softer handmade look. Avoid sewing across the outer five-inch fringe area because those sections must remain free for cutting and tying.
Cut and tie the fringe
Use a ruler and fabric chalk to mark parallel lines from each outer edge toward the stitched border. Space the lines about one inch apart. Make the cuts carefully, stopping at the seam and keeping every strip the same length. Cutting through both fleece layers at the same time ensures that each top strip matches its bottom partner.
Work around the blanket one side at a time. For every pair, tie the upper and lower strips together with a firm double knot. A simple overhand knot is sufficient, but keep the tension even so the edge does not pucker. Tie the corners last, checking that the corner strips do not overlap or become excessively bulky.
If the fabric stretches while cutting, gently flatten the edge before making the next strip. Slight variations are part of the handmade character, but consistent widths will make the finished tied fringe look more polished. Trim loose threads with small scissors once all the knots are secure.
Add personal details and care
The blanket can be finished as soon as the fringe is tied, but small details make it feel especially personal. Add a fabric label to the back, embroider a name on one corner, or choose a third fleece color for alternating fringe knots. A strip of coordinating ribbon can also be sewn to one edge as a hanging loop.
For a child’s blanket, select cheerful colors and avoid small detachable decorations. For a seasonal gift, use snowy white and silver-gray fleece, autumn tones, or bright colors for a birthday sleepover. A matching pillow cover or simple fleece cushion can turn the blanket into a coordinated handmade set.
Wash the finished throw on a gentle cycle with cool or warm water and dry it on low heat. Avoid high temperatures, which can damage the fibers or make the knots tighter than intended. Check the fringe occasionally after washing and retie any loose strips.
Helpful finishing recommendations
- Use sharp scissors or a fresh rotary blade for clean, even fringe cuts.
- Test your stitch length and tension on fleece scraps before sewing the blanket.
- Keep the tied knots snug but not tight enough to gather the stitched center.
- Combine a printed fleece with a solid color to make the fringe stand out.
- Measure from the sewn border rather than the outer edge when marking each strip.
A handmade fleece throw is a quick way to turn simple fabric into something warm and memorable. Choose your colors, clear a comfortable cutting space, and work through the blanket one edge at a time. When the final knot is tied, your new cozy covering is ready for a movie night, a quiet afternoon, or a thoughtful handmade gift.