Sew A Drawstring Backpack From A Pillowcase
A pillowcase is an ideal starting point for a small drawstring backpack: it is already hemmed, generously sized, and made from fabric that is easy to handle. With a few simple cuts and straight seams, you can turn unused bedding into a practical bag for library books, toys, snacks, or a change of clothes.
This upcycling project works well for beginners because the construction is forgiving. There is no complicated pattern, zipper, or lining to install, and the finished backpack can be customized with fabric paint, appliqué, patches, or decorative stitching.
Choose a sturdy cotton pillowcase in a color or print you enjoy. Before cutting, wash and dry it as you normally would so the fabric will not shrink after the bag is finished.
Materials And Basic Measurements
You will need one standard pillowcase, matching or contrasting thread, fabric scissors, pins or clips, a ruler, an iron, and a sewing machine or needle for hand sewing. You will also need about 2 meters of cotton cord, clothesline, or sturdy ribbon for the backpack straps.
A standard pillowcase usually creates a compact day bag, but the finished dimensions depend on its original size. For a larger backpack, begin with a king-size pillowcase or add fabric panels to the sides. Keep the opening wide enough for the items the bag is intended to carry.
| Material | Suggested Amount | Purpose |
|---|---|---|
| Cotton pillowcase | 1 | Main backpack body |
| Cotton cord or ribbon | About 2 m | Drawstring straps |
| Thread | 1 spool | Sewing seams |
| Fabric scissors | 1 pair | Cutting and trimming |
| Pins or clips | Several | Holding folds in place |
| Iron | 1 | Pressing hems and channels |
Press the pillowcase before marking it. Smooth fabric produces straighter seams and makes it easier to measure the top edge accurately. If the pillowcase has a decorative cuff or envelope flap, decide whether to preserve it as part of the design or trim it away.
Preparing The Pillowcase
Turn the pillowcase inside out and place it flat with the open end facing you. Most pillowcases already have a closed bottom and two closed side seams, so the bag body is nearly complete. Check those seams for loose threads and reinforce any weak spots with a second line of stitching.
If you want a shorter backpack, mark a horizontal line across the lower portion of the pillowcase and trim away the excess from the open end. Leave enough height for the bag to hold its contents comfortably, plus several centimeters for the drawstring casing.
Fold the raw top edge inward by about 1 centimeter and press it. Fold it inward again by 2 to 3 centimeters, creating a clean channel. Pin the fold around the entire opening, then stitch close to the lower edge of the channel. Leave the side seams intact and make sure the cord will pass through easily.
Sewing The Drawstring Channels
A drawstring backpack needs two separate cord paths so the straps can slide in opposite directions. The simplest method is to stitch a second line across the top, parallel to the first, leaving a channel between the seams. On many pillowcases, the existing top hem can serve as one side of the casing.
Sew slowly around the opening, keeping the seam even. Backstitch at the beginning and end, since the casing will be pulled repeatedly. If you are sewing by hand, use small running stitches followed by backstitches at the side seams for extra strength.
Turn the bag right side out after checking the channels. Use a safety pin or bodkin to thread one cord through the front channel and back around through the other side. Repeat with the second cord, beginning from the opposite side. The two cords should form a loop on each side of the backpack.
Attaching The Backpack Straps
Lay the bag flat and identify the two lower corners. Each cord loop should run from the upper opening down one side of the bag and back up to the same side. Thread both ends of one loop through a corner seam allowance or a small sewn fabric tab.
For a secure finish, make a fabric tab from a scrap of cotton measuring approximately 5 by 8 centimeters. Fold the long edges inward, press them, then fold the tab in half. Stitch it firmly to the lower corner, catching the cord inside the folded tab. Repeat on the opposite corner with the second cord.
Reinforce each attachment with a small rectangle or crossed stitching. The lower corners receive considerable tension when the backpack is opened and closed, so this extra sewing is worthwhile. Trim cord ends neatly and tie firm knots, leaving enough length for comfortable shoulder straps.
Personalizing The Fabric Bag
A plain pillowcase backpack can become a useful canvas for creativity. Add an initial, a simple animal face, a row of felt shapes, or an iron-on patch before assembling the casing. If painting the fabric, place cardboard inside the pillowcase to prevent paint from soaking through to the opposite side.
Children can help choose colors, draw a design, or arrange appliqué pieces while an adult handles cutting and sewing. Use washable fabric markers for simple illustrations, and heat-set them according to the manufacturer’s directions. For a softer handmade look, embroider a name or small motif with cotton floss.
The same reusable spirit can extend to other homemade projects. A small matching pouch made from leftover pillowcase fabric can hold hair ties, craft supplies, or travel-size items, while recipes and homemade cosmetics can inspire a coordinated self-care gift set.
Finishing And Everyday Use
Inspect the finished bag by opening and closing it several times. The drawstrings should move smoothly through the channels, and the upper hem should remain flat instead of twisting. If the cord catches, widen the channel slightly or replace a thick cord with soft cotton tape.
Wash the backpack on a gentle cycle and air-dry it when possible. A pillowcase bag is light enough for everyday errands, but it should not carry heavy objects unless the seams and strap tabs have been reinforced carefully. For children, avoid very long loose cords and adjust the straps so they sit comfortably above the waist.
Use the finished drawstring sack for a picnic, a craft kit, dance shoes, or a holiday gift. Seasonal fabric makes it suitable for party favors, while a neutral print creates a practical everyday accessory. Once the basic version is complete, you can experiment with pockets, a contrasting lining, or a curved bottom.
Simple Ways To Improve The Finish
- Press every fold before sewing to create crisp, professional-looking edges.
- Reinforce the side seams and lower strap points with backstitching or a second seam.
- Choose soft, washable cord that will not dig into the shoulders.
- Add a small label or fabric loop inside the bag for a personal touch.
- Test the backpack with lightweight items before using it for heavier loads.
With one pillowcase and a little patient sewing, you can make a useful backpack while keeping fabric out of the waste stream. Gather your supplies, choose a cheerful design, and turn an overlooked pillowcase into a handmade bag ready for its next adventure.