Sew a fabric book cover with an elastic band
A handmade fabric book cover protects favourite novels, school readers and well-loved notebooks while adding a personal touch. This project uses simple measurements, a small amount of sewing and an elastic closure, so it suits beginners who want a useful result without investing in specialised equipment.
The cover can be adapted for paperback books, journals, planners or exercise books. Choose bright cotton from Spotlight, Lincraft or a local fabric stall, or repurpose a clean shirt, tea towel or op-shop textile. The finished sleeve makes a thoughtful gift for Book Week, a birthday, a teacher or anyone who enjoys carrying a book on the train across Sydney or Melbourne.
Choose fabric and supplies
Light to medium-weight woven cotton is the easiest material to sew. It folds neatly around the book, stays comfortable in the hand and can usually be pressed without difficulty. Quilting cotton gives plenty of colour and pattern choices, while denim, canvas and heavy upholstery fabric may be too bulky for a first attempt.
Wash and dry the fabric before cutting, particularly if it came from a fabric shop or an old garment. Prewashing removes excess dye and reduces the chance of shrinkage later. A basic sewing machine is helpful, but this cover can also be stitched by hand with a backstitch.
A practical materials list
- Cotton fabric large enough to wrap around the closed book
- Matching thread, sewing scissors and pins or clips
- Measuring tape, ruler, fabric marker and an iron
- Flat elastic, round elastic or a recycled hair tie
- The book you intend to cover, used as the measuring template
A 15–20 mm wide flat elastic gives a neat, secure finish. For a child’s book, soft elastic is more comfortable and less likely to catch on a school bag. If you are making several covers for an Australian school term, choose different prints so each child can identify their own book quickly.
Measure the book accurately
Close the book and measure its height from top to bottom. Next, measure across the front cover, the spine and the back cover in one continuous line. Add around 4 cm to this width for the two folded hems and a little ease. Add 2 cm to the height for a 1 cm seam allowance at both ends.
For example, a book measuring 21 cm high and 32 cm across the covers and spine needs a fabric rectangle about 23 cm by 36 cm. This measurement creates a snug cover without making the book difficult to slide inside. If the book is thick or has a flexible cover, add another 1–2 cm to the width.
Cut a paper template first if you are unsure. Wrap it around the book and check that the front and back flaps are deep enough to hold the cover securely. This is especially useful for Australian school exercise books, which can vary in size between brands sold at Kmart, Big W and independent newsagencies.
Compare closure options
The elastic can sit vertically over the centre of the book or horizontally around its width. A vertical band is quick to sew and works well for a standard paperback. A horizontal band looks attractive on a journal and can help keep loose pages closed, but it requires more accurate placement.
| Closure style | Best for | Elastic length guide | Sewing difficulty |
|---|---|---|---|
| Vertical centre band | Novels and school readers | Book height minus 2–3 cm | Easy |
| Horizontal centre band | Journals and planners | Book width minus 2–3 cm | Easy |
| Corner loop | Slim notebooks | Book height plus 4–5 cm | Moderate |
| Double band | Thick sketchbooks | Two measured pieces | Moderate |
Measure the elastic around the closed book rather than relying only on a formula. It should stretch enough to hold the cover in place but should not bend the book’s pages. Cut it slightly shorter than the book measurement, then test it before stitching.
For a recycled finish, use elastic from an old notebook, a spare luggage strap or a wide hair elastic. Check that the material has recovered its stretch and has no cracked edges. Bright elastic can become part of the design, while matching elastic creates a more understated result.
Cut and prepare the fabric
Place the fabric right side down and mark the rectangle with a ruler and fabric pencil. Use the grain of the fabric as a guide where possible, especially if the print has stripes or checks. Cut carefully so the top and bottom edges remain straight. A rotary cutter and cutting mat can speed up the process, though sharp fabric scissors work perfectly well.
Fold 1 cm towards the wrong side along both short edges and press. Fold them over once more to hide the raw edges, then press again. These double-fold hems prevent fraying and give the inside of the cover a clean appearance.
If your fabric has a directional pattern, rotate the book template in your mind before cutting. Native florals, beach motifs or Australian animal prints may look upside down if the direction is ignored. A small scrap can be used to test the layout before cutting the main piece.
Sew the cover and elastic
With the fabric right side up, fold each short end towards the centre. Use the book to check the depth of the flaps: they should cover roughly one-third to one-half of each cover. Pin or clip the folds, then stitch close to the inner edge of each hem. Backstitch at the beginning and end to secure the seams.
Place the elastic over the outside of the cover and mark its position. For a vertical closure, centre it across the width of the book and position it so the ends will be hidden beneath the inside flap. Stitch one end firmly to the upper flap area, keeping the seam inside the cover. Stretch the elastic gently, check the tension around the book, and sew the second end in place.
Small details that make a difference
- Reinforce each elastic end with a small rectangle of stitching
- Keep the elastic flat and untwisted before sewing
- Use clips instead of pins when working with thick layers
- Trim loose threads before turning the cover around the book
- Press the finished cover on a suitable heat setting
Slide the front cover into one fabric pocket and the back cover into the other. If the pockets feel loose, move the stitched edges slightly inward. If they are too tight, unpick a short section and resew with a narrower seam. The fabric should lie flat over the spine without pulling.
Personalise the finished book cover
Add a fabric label with a name, initial or short message before sewing the side flaps. Simple appliqué shapes, decorative machine stitches and embroidered stars can make the cover unique. For younger makers, felt patches are easy to attach and provide a soft, colourful detail.
Seasonal fabrics work well for Australian celebrations and school activities. Try native flowers for a spring project, bright colours for a summer holiday journal or a handmade cover for a Book Week character costume. A cover featuring ocean blue cotton can suit a beach-reading kit for the Queensland or New South Wales coast.
Avoid adding bulky buttons or hard decorations where the book will rest against a child’s back in a school bag. Washable materials are also the practical choice for busy households, especially during hot weather when books and bags may be carried outdoors. A removable elastic band makes it easier to wash the fabric sleeve when necessary.
The same method can be scaled for a recipe notebook, a travel diary or a handmade photo album. Use sturdy fabric for a kitchen notebook and add a small loop for a pen. For a gift sold at a local makers’ market, package the cover with a blank journal and a matching bookmark made from fabric scraps.
Make a cover that fits a favourite book, using the measurements above and a fabric pattern that reflects its owner. Share the finished handmade project with the creative community at TO MADE IT! and keep exploring practical sewing ideas for everyday life.