Sew a reversible placemat with a napkin pocket
A reversible placemat with a napkin pocket is a practical sewing project that adds colour and order to everyday meals. One side can suit family dinners, while the other brings a brighter look to weekend brekkie, children’s parties or a relaxed barbecue on the verandah.
This beginner-friendly handmade mat uses straight seams, simple measurements and washable cotton fabric. It is also a clever way to use fat quarters, leftover quilting cotton or sturdy fabric from your stash. Once you understand the construction, you can adjust the size and make a matching set for your dining table.
Gather practical materials
For one placemat, choose two coordinating cotton fabrics, each measuring about 35 x 45 cm. You will also need a piece of lightweight fusible interfacing, approximately 34 x 44 cm, plus a 20 x 18 cm fabric piece for the napkin pocket. Quilting cotton is a good choice because it presses easily and comes in many colourful prints.
Keep fabric scissors, sewing thread, pins or clips, an iron, a ruler, fabric chalk and a sewing machine nearby. A walking foot can help if your layers shift, although an ordinary presser foot works well when you sew slowly. Browse these sewing patterns for further inspiration if you want to create coordinating napkins, table runners or fabric gifts.
Prewash the fabric before cutting, especially if the finished placemat will be used often. Australian laundry conditions can be tough during a hot summer, and prewashing helps prevent the finished piece from shrinking unevenly after its first wash.
Measure and cut the layers
Place the two main fabrics right sides together and trim them to the same size. For a standard adult placemat, 35 x 45 cm gives enough room for a dinner plate, cutlery and a glass. If you are sewing a child-sized version, try 28 x 38 cm instead.
Fuse the interfacing to the wrong side of the fabric that will form the front. Follow the product instructions for heat and pressing time, and protect your ironing board with a pressing cloth if needed. The interfacing gives the placemat body without making it stiff, helping it sit flat on the table.
For the pocket, cut two rectangles measuring 20 x 18 cm. Decide which fabric should show on the pocket front, or use a third coordinating print for a patchwork effect. A strong contrast makes the napkin holder easy to see, while a similar print creates a quieter, more unified look.
Prepare the napkin pocket
Put the two pocket rectangles right sides together. Sew around the sides and lower edge with a 1 cm seam allowance, leaving the top open. Clip the corners carefully without cutting through the stitching, then turn the pocket right side out and press it flat.
Fold the raw top edge towards the wrong side by about 1 cm and press it firmly. Stitch across this edge, either with a straight line or a narrow zigzag. If you prefer a decorative finish, use a contrasting thread and a simple scallop or wavy stitch.
Position the pocket on the lower-right or lower-left corner of the placemat front. Keep it centred from the side edge and leave enough space around the perimeter for the final topstitching. Pin or clip the pocket in place, then sew along both sides and the bottom edge. Backstitch at each corner so the pocket can hold a rolled napkin without pulling away.
Assemble the reversible mat
Lay the fabric with the attached pocket on top of the second placemat piece, right sides facing each other. Smooth the layers and match all four corners. Pin around the edges, leaving a turning gap of about 8 cm along one long side.
Sew around the perimeter with a 1 cm seam allowance. Move slowly near the pocket, checking that its top opening remains free and does not become caught in the upper seam. If your fabric is bulky, reduce the seam allowance slightly at the corners or trim the interfacing away from the seam line.
Before turning, clip across each corner and make a few shallow snips into the curved seam allowance if you have rounded the corners. These small cuts allow the fabric to spread neatly instead of bunching when the placemat is turned.
Turn and press the layers
Reach through the opening and gently pull the placemat right side out. Use a blunt turning tool, knitting needle or capped pen to ease the corners into shape. Avoid pushing too hard, as a sharp point can poke through the fabric.
Press the entire mat from the centre outwards. Tuck the raw edges of the opening inside so they align with the sewn edge. A well-pressed edge makes the final stitching much easier and gives the reversible design a crisp, professional appearance.
Topstitch around the whole placemat, approximately 3 mm from the edge. This closes the turning gap and adds a firm outline. For extra durability, sew a second line 6 mm inside the first, or quilt a few simple diagonal lines across the centre.
Add useful finishing details
A fabric napkin can be folded into thirds and slipped into the pocket, or you can make a matching napkin from a 40 cm square of cotton. For family meals, choose a darker pocket fabric that will disguise small food marks. For a birthday table, bright checks, spots or printed cotton make the setting feel cheerful without requiring complicated decoration.
If your table is outdoors, select tightly woven cotton and avoid very pale colours that show barbecue sauce, tomato-based dishes or muddy fingerprints. A washable placemat is especially useful in Australian homes where indoor-outdoor entertaining is common, from a Melbourne courtyard to a sunny Queensland patio.
You can personalise each mat with a fabric label, embroidered initial or contrasting binding. Rounded corners are safer for young children, while a narrow hanging loop on one short edge allows the placemat to be stored on a hook. Wash on a gentle cycle and reshape while damp before air-drying.
Choose the right construction method
The basic version is quick enough to sew in an afternoon, but different materials and techniques create different results. Compare the options below before cutting your fabric, particularly if you are making a full set for a family gathering or a local school fete stall.
A standard machine finish suits beginners and everyday use. Quilting adds texture and helps the mat keep its shape, while bias binding gives a colourful edge and makes a striking contrast between the two sides. For homes with limited sewing equipment, the simplest method is usually the most practical.
| Style | Best fabric choice | Difficulty | Main benefit |
|---|---|---|---|
| Two-layer turned mat | Quilting cotton | Easy | Fast, neat and reversible |
| Interfaced mat | Cotton with light interfacing | Easy | More structure and a flatter finish |
| Quilted mat | Cotton with batting | Intermediate | Padded texture and extra durability |
| Bound-edge mat | Cotton with bias binding | Intermediate | Bold edging and easy shape control |
| Child-sized mat | Washable cotton | Easy | Smaller, lighter and simple to handle |
For a coordinated set, repeat the same cutting measurements but rotate the prints so every placemat looks slightly different. Four mats in mixed colours work well for a casual Australian dining area, while six matching versions create a tidy setting for Christmas lunch or a neighbourhood gathering.
Use this project as a starting point for a larger handmade table collection. Add matching coasters, fabric cutlery rolls or a table runner, and keep the napkin pocket on the outer side when the placemat is laid out. With a few metres of cotton and an afternoon at the machine, you can make useful pieces that bring handmade character to every meal.