Sew a Simple Drawstring Backpack from Old Jeans

An old pair of jeans can become a sturdy little backpack for library books, snacks, toys, or everyday adventures. Denim is durable, washable, and easy to combine with colorful fabric scraps, making it a practical material for a beginner sewing project.

This upcycled bag uses basic straight stitches and a simple drawstring closure. You can make it with a sewing machine or sew it by hand with a strong backstitch. The finished backpack is useful on its own, while pockets, patches, and decorative stitching give it a personal style.

Choose jeans that are clean and free from excessive wear. Medium-weight denim is easiest to sew, especially if this is your first recycled clothing project. Keep the original waistband, pockets, or side seams whenever possible to add character without extra work.

Materials And Measurements

You will need one pair of old jeans, fabric scissors, a ruler, pins or clips, a fabric marker, matching thread, and a sewing machine or hand-sewing needle. Add an iron, seam ripper, and safety pin for easier handling. Two lengths of cotton cord, each about 70–80 cm long, will form the shoulder straps.

For a child-sized backpack, cut two denim rectangles measuring approximately 32 cm wide by 38 cm tall. These measurements include a little extra room for seams and a folded casing at the top. If the jeans are too narrow, join two leg pieces with a visible central seam or add a contrasting cotton panel.

You will also need two small denim rectangles, about 5 cm by 7 cm, to reinforce the lower strap points. A scrap of lightweight cotton can line the inside, though lining is optional. Avoid very thick seams in the main panels because several layers of denim can be difficult for a domestic sewing machine.

Preparing The Denim Pieces

Wash and dry the jeans before cutting. This removes dirt and allows the fabric to shrink before the bag is assembled. Cut off the legs just above the crotch, then open the inner leg seams with a seam ripper or scissors. Press the pieces flat and place the straightest sections along your cutting layout.

Mark two matching rectangles on the wrong side of the denim. If you want to preserve a back pocket, position one rectangle so the pocket remains centered on the finished front panel. Check that belt loops, rivets, and heavy waistband sections will not fall directly into your stitching path.

Cut the panels carefully, then trim loose threads. Fold the upper edge of each rectangle down by 1 cm and press it. Fold it down again by about 3 cm to create the drawstring channel. Do not sew this fold yet; pressing it first makes the final assembly much neater.

Sewing The Backpack Body

Place the denim panels right sides together, aligning the side and bottom edges. Pin or clip the sides and bottom, then sew with a 1 cm seam allowance. Reinforce the beginning and end of each seam with several reverse stitches. If sewing by hand, use small, firm stitches and knot the thread securely.

Finish the raw seams with a zigzag stitch, pinking shears, or a second line of straight stitching. This helps prevent fraying when the backpack is washed. Press the seams open or toward one side, taking care around any bulky jeans seams.

To make a flatter base, pinch each bottom corner so the side seam sits directly over the bottom seam. Mark a line about 3 cm from the point and stitch across it. Trim the excess triangle if desired. This small boxed corner gives the bag more room and helps it stand instead of collapsing into a flat pouch.

Turn the backpack right side out and press the upper folded edge again. Stitch around the lower edge of the casing, leaving a continuous tunnel for the cord. Sew slowly over the side seams, using a fresh denim needle if you are working with a machine.

Choosing Straps And Closures

There are several ways to finish an upcycled denim backpack. Cotton cord is the fastest option, while denim tubes create a fully recycled look. The table below compares common choices before you decide how to complete your bag.

Option Materials Difficulty Best Feature
Cotton cord Two lengths of sturdy cord Easy Quick, flexible, and comfortable
Denim straps Narrow strips from the jean legs Moderate Matches the bag and uses more scraps
Twill tape Two lengths of strong tape Easy Smooth, washable, and easy to thread
Braided fabric Three narrow fabric strips Moderate Decorative and customizable

For cord straps, cut two pieces of equal length. Attach one cord to a safety pin and guide it through the casing from one side, around the entire opening, and back out at the same point. Thread the second cord from the opposite side so both cords form a loop through the channel.

At the bottom corners, sew the cord ends firmly to the reinforced denim patches. Position one cord end on each side of the backpack, then stitch a small square with an X through the cord. Repeat on the other side. Test each attachment with a gentle pull before giving the bag to a child.

Adding Pockets And Personality

A back pocket from the original jeans can become a useful front pocket for crayons, keys, hair clips, or small treasures. Carefully cut around it, leaving a narrow border of denim, then place it on the front panel before sewing the backpack body. Stitch along the original pocket edges and reinforce the top corners.

Decorate the bag with fabric scraps, embroidered initials, iron-on patches, or rows of contrasting thread. A small applique made from felt can turn the backpack into an animal, rocket, flower, or favorite character. Keep embellishments securely stitched, especially if the bag will be used by a young child.

For a party favor or themed outing, coordinate the backpack with the event colors and add a name label inside. Browse these party inspiration ideas for color schemes and handmade details that can be adapted to the bag.

Finishing And Safety Checks

Trim every loose thread and turn the backpack inside out to inspect the seams. Check that the casing is open at both ends and that the drawstrings slide smoothly without catching. If the cord feels too long, shorten it while leaving enough length for comfortable shoulder loops.

Wash the finished bag on a gentle cycle and air-dry it the first time. This reveals whether any seam needs reinforcement and softens the denim. Avoid placing heavy books or sharp objects inside until the strap attachments have been tested.

For small children, use soft, wide cord or cotton tape rather than thin cord that could dig into the shoulders. Keep strap lengths appropriate for the wearer, and supervise use when necessary. A handmade backpack should be sturdy, comfortable, and free from loose hardware.

Practical Ways To Customize It

This project also works well as a family sewing activity. Older children can help mark panels, choose decorations, or thread the casing, while an adult handles thick seams and final reinforcement. Each backpack can have a different pocket placement or patch design, even when the basic construction stays the same.

An old pair of jeans has plenty of useful fabric beyond this one bag. Save the remaining hems for handles, the waistband for trim, and small pockets for future organizers or craft projects. Upcycling the whole garment turns discarded clothing into a collection of practical handmade items.

Gather a worn pair of jeans, choose your favorite scraps, and sew a durable drawstring backpack that carries a little more personality than anything from a store.